 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| VISHAY LH1511BAB/ BABTR/ BT Vishay Semiconductors 1 Form B Solid State Relay DIP SMD Features * * * * * * * Isolation Test Voltage 3750 VRMS Typical RON 10 Load Voltage 200 V Linear, AC/DC Operation Clean Bounce Free Switching Low Power Consumption SMD Lead Available on Tape and Reel i179031 S DC 6 5 S' S' S' 4 Agency Approvals * UL - File No. E52744 * CSA - Certification 093751 * BSI 1 2 3 Applications General Telecom Switching Security Equipment Instrumentation Industrial Controls structed as a multi-chip hybrid device. Actuation control is via an Infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity. The relays can be configured for AC/DC or DC only operation. Order Information Part LH1511BAB Remarks Gullwing, Tubes, SMD-6 Gullwing, Tape and Reel, SMD-6 Tubes, DIP-6 Description The LH1511 relays are SPST normally closed switches (1 Form B) that can replace electromechanical relays in many applications. The relays are con- LH1511BABTR LH1511BT Absolute Maximum Ratings, Tamb = 25 C Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Ratings for extended periods of time can adversely affect reliability. SSR Parameter LED continuous forward current LED reverse voltage DC or peak AC load voltage Continuous DC load current bidirectional operation Continuous DC load current unidirectional operation Peak load current (single shot) Ambient temperature range Storage temperature range t = 100 ms IR 10 A IL 50 A Test condition Symbol IF VR VL IL IL IP Tamb Tstg Value 50 8.0 200 200 300 400 - 40 to + 85 - 40 to + 125 Unit mA V V mA mA mA C C Document Number 83811 Rev. 1.2, 15-Mar-04 www.vishay.com 1 LH1511BAB/ BABTR/ BT Vishay Semiconductors Parameter Pin soldering temperature Input/output isolation voltage Output power dissipation (continuous) Test condition t = 10 s max VRMS t = 1.0 s, IISO = 10 A max Symbol Tsld VISO Pdiss Value 260 3750 550 VISHAY Unit C VRMS mW Electrical Characteristics, Tamb = 25 C Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. Input Parameter LED forward current, switch turn-on LED forward current, switch turn-off LED forward voltage Test condition IL = 200 mA, t = 10 ms VL = 150 V IF = 10 mA Symbol IFon IFoff VF 1.15 Min 0.2 Typ. 0.9 1.0 1.26 2.0 1.45 Max Unit mA mA V Output Parameter ON-resistance ac/dc : Pin 4, 6 (+) to 5 (-) ON-resistance dc: Pin 4, 6 (+) to 5 (-) Off-resistance Off-state leakage current Output capacitance Test condition IF = 0 mA, IL = 50 mA IF = 0 mA, IL = 100 mA IF = 5.0 mA, VL = 100 V IF = 5.0 mA, VL = 200 V IF = 5.0 mA, VL = 50 V Symbol RON RON ROFF 0.1 Min Typ. 10 2.5 1.4 0.07 50 1.0 Max 15 3.75 Unit G nA pf Transfer Parameter Capacitance (input-output) Turn-on time Turn-off time Test condition VISO = 1.0 V IF = 10 mA, IL = 50 mA IF = 10 mA, IL = 50 mA Symbol CIO ton toff Min Typ. 3.0 1.2 1.0 3.0 3.0 Max Unit pF ms ms Typical Characteristics (Tamb = 25 C unless otherwise specified) Fig. 1 Recommended Operating Conditions 150 LOAD CURRENT (mA) 5.0 mA 120 90 60 30 0 -40 -20 0 20 40 60 80 AMBIENT TEMPERATURE (C) ilh1511bt_00 www.vishay.com 2 Document Number 83811 Rev. 1.2, 15-Mar-04 VISHAY Package Dimensions in Inches (mm) LH1511BAB/ BABTR/ BT Vishay Semiconductors DIP .330 (8.38) .100 (2.54) .250 (6.35) .360 (9.14) ISO Method A .018 (.46) 6-.031 (6-.80) Dia. .100 (2.54) .300 (7.62) .130 (3.30) .250 (6.35) .360 (9.14) .285 (7.24)Typ. .360 (9.14) .200 (5.08) i178015 Package Dimensions in Inches (mm) SMD .330 (8.38) .100 (2.54) .100 (2.54) .250 (6.35) .375 (9.53) .075 (1.90) .327 (8.31) .018 (.46) .059 (1.50) .300 (7.62) .175 (4.45) .130 (3.30) ISO Method A i178016 .025 (.64)Typ. .010 (.25)Typ. Document Number 83811 Rev. 1.2, 15-Mar-04 www.vishay.com 3 LH1511BAB/ BABTR/ BT Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. VISHAY 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 4 Document Number 83811 Rev. 1.2, 15-Mar-04 |
Price & Availability of LH1511BAB
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |